Cross Technologies 2016-26 Bedienerhandbuch PDF herunterladen (Seite 16)

2.5.5 Alarm Indications

An alarm condition for will occur if the local oscillator phase lock loop (PLL) comes out of lock.

The Mute LED will light if you select to mute the Tx Signal and the Remote LED will light when you select

the Remote mode.

ON POWER UP

NORMAL DISPLAY

PUSHING MENU/EXECUTE SEQUENCE

REV 1.00

F=2050 G=+00

F = 2

050

SCROLL <>

SCROLL

PUSH BUTTON

DNSPECTRUM NON

REMOTE

OFF

EXT REF

OFF

SCROLL <>

SCROLL

PUSH BUTTON

Power Up

Normal Display

Menu 1 Down Frequency

Menu 2 Down Gain (0 to +50)

Menu 3 Set Unit to Remote

Operation

Menu 4 Select Non-inverting or

Inverting Spectrum

Menu 5 Select External 10 MHz

Reference (option E)

Menu 6 Select 10MHz Output

(option E)

Menu 7 Select RS232, RS422, or

RS485 remote control (option Q)

Menu 8 Select remote address for

unit (RS485 only) (option Q)

Save? When “R” is selected from

any menu above, or at the end

G = +0

SCROLL <>

SCROLL

PUSH BUTTON

SAVE SETTINGS? Y N

SCROLL <>

PUSH BUTTON

RS232

DN REF OUT OFF R

SCROLL <>

SCROLL

PUSH BUTTON

SCROLL <>

SCROLL

PUSH BUTTON

SCROLL <>

SCROLL

PUSH BUTTON

SCROLL <>

SCROLL

PUSH BUTTON

RADDRESS = 00

SCROLL <>

SCROLL

PUSH BUTTON

FIGURE 2.5 Menu Display and Sequence

2016-26 Manual, Rev. A Page 16 2/2/09

1 2 ... 11 12 13 14 15 16 17 18

Kommentare zu diesen Handbüchern

Keine Kommentare

Cross Technologies 2016-26 Bedienerhandbuch Seite 16

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nein Cross Technologies 2016-26