Cross Technologies 2015-25 Bedienerhandbuch PDF herunterladen (Seite 6)

B) Status Requests - Table 1.1 lists the status requests for the 2015-25 and briefly describes them.

* PLEASE NOTE: The two character {aa}(00-31) prefix, in the table below,

should be used ONLY when R

S-485, (OPTION-Q), is selected.

Table 1.1 2015-25 Status R

equests

Status Requests

Command Syntax* Description

Command Status {aaS1} Returns {aaS1bbbbcccddAM)} where:

• bbbb = Tx frequency (MHz)

4 characters - standard -

(7 characters - Option-X) (5 characters - Option-5)

• Standard 1 dB step format: ccc = Tx gain (-10 to +30)

• Z OPTION (0.1 dB steps): cccc = Tx gain (-100 to +300)

• dd = Tx input level (10 to 40 => -10 to -40)

• A = 0 if no alarm, 1 if summary alarm)

• M = Tx RF Status (1 = Normal, 0 = Muted)

Command Status {aaS2} Returns {S2E} where:

• E = Ext 10MHz Status (1 = on, 0 = off)

2015-25 Manual, Rev. J Page 6 07/15/14

1 2 3 4 5 6 7 8 9 10 11 ... 17 18

Keine Kommentare

Cross Technologies 2015-25 Bedienerhandbuch Seite 6